Antennas with spring function, nickel 0.3 to 0.4 mm thickness Cut before a piece of pipe off (1 cm to 1.5 cm) with a sharp knife, as shown in the photo. (Role / cutting through the nozzle so, then the hole remains open) Then drill a hole 1 mm in the roof of the cabin style. If you want to place the antenna bracket on top of the roof, glue the aluminum pipe so, after which your antenna into the hole down with a little glue on it. Would you like the antenna support on the side of the roof of the cabin-style places, you bend the cut piece of aluminum pipe even with tweezers or between the fingers, and glue them into the drilled hole 1 mm, and then you let the antenna inside bags with a little glue on it This set contains only two antennas 1:32 Suitable 14 years+
