Width/ Expulsion sign/- Traffic stickers 2 stripes RED/ WHITE approx. 5 x 5 mm Pré-Cut Decals 1:32 Farmmodels.nl PCD-GEV-00672

Product Description Width/ Expulsion sign/- Traffic stickers 2 stripes RED/ WHITE approx. 5 x 5 mm Pré-Cut Decals 1:32 Farmmodels.nl Professional pre-cut, extra thin and waterproof stickers for you. By using a special foil with a dark back, the surface to be covered will no longer shine through. These stickers are also very suitable for covering circular surfaces. You can process these stickers with the  "Dry"  or  "Wet" method  . Method:  also watch  our  instruction video  at the bottom of this page !! Dry method: -Process model and sticker at room temperature -Clean & dry the surface -Remove the excess foil from the supplied sticker -"Spoon" the pre-cut sticker from the sticker sheet and place it on your model -Press the sticker firmly to activate the pressure-sensitive adhesive;   This is fully cured after 48 hours Wet method: -Process model and sticker at room temperature -Clean & dry the surface -Mix 1 drop of soap with lime-free water (boiled or distilled) in a bowl  or plant sprayer -Remove the excess foil from the supplied sticker sheet -Spray the surface to be stickered with the plant sprayer -"Spoon" the pre-cut sticker from the sticker sheet and place   your sticker on your model  or -Pull your sticker through the bowl of water / soap and place your sticker on your model -Correct the position if necessary: ​​these stickers are perfect for this -Rub the water under the sticker from the center to the outside of the sticker -Press the sticker firmly to activate the pressure-sensitive adhesive;  This is fully cured after 48 hours Professional pre-cut stickers. Colorfast and water-resistant for years. Wishing you much (re)building and stickering fun, Team Farmmodels.nl     View full description Product number: PCD-GEV-00672